Parameters
| Brand：seepex | Speed：279(rpm) | Power：3kW |
| Drive mode：Electric | Suction port：DN80(mm) | Suction head：10m |
| Performance：Wear-resistant | Discharge port：DN80(mm) | Shaft power：3 |
| Number of impellers：Single stage | Efficiency：98% | Operating temperature：Normal temperature |
| Flow rate：3.1-16.4(m3/h) | Output flow rate：200 | Material：Stainless steel |
| Head：60m | Weight：80kg | Model：BN15-6L |
BN15-6l introduction
seepex BN15-6l adopts self-priming design, can handle negative pressure suction, and can provide high lift. Thanks to its unique structure, it has high self-priming ability and can continuously and stably transport even if the medium contains gas or particles.
Its rotor is made of wear-resistant alloy and is precision machined to ensure accurate clearance with the stator, thus improving the efficiency and service life of the pump. The stator is made of special rubber and can adapt to various chemical media, ensuring stable operation of the pump even in harsh environments.
In addition to its excellent performance, the seepex BN15-6l also has excellent energy efficiency. It uses an efficient continuously variable speed motor that can automatically adjust the speed according to process conditions, thereby significantly reducing energy consumption.
At the same time, the pump adopts a modular design, which is easy to maintain and repair, which can minimize downtime and improve equipment utilization.
The seepex BN15-6l screw pump is widely used in chemical, pharmaceutical, food processing and other fields due to its excellent performance and reliability.
people also ask
SEEPEX open hopper pumps are used to discharge thickened and dewatered sludges for onward processing. SEEPEX can also directly mount pumps under storage silos that have a capacity to backmix to control sludge dry solids content.
Headquartered in Bottrop, Germany, SEEPEX has more than 800 employees worldwide and specializes in manufacturing advanced pump technology that efficiently conveys highly viscous or abrasive substances at low pulsation rates.
Head is fluid independent, that is, regardless of the fluid’s relative density, the pump will lift it to the same height. Therefore, it does not matter whether the fluid is water or heavy sludge. Pressure, on the other hand, is fluid dependent and is affected by gravity.