MOYNO Model 2000 HS Large Screw Pumps

Home » MOYNO Model 2000 HS Large Screw Pumps

2000 HS Large Screw Pumps

The 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps and open conveyors, the 2000 HS System requires a much lower capital investment, lower operating costs and less maintenance.

The 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps and open conveyors, the 2000 HS System requires a much lower capital investment, lower operating costs and less maintenance.

Fluid Type

High-viscosity and high-solids

Fluid Supply

  • Via suction hopper of Twin Screw Feeder (TSF) and chutes
  • Capable of varying TSF length to match wide feed areas from centrifuges and 1 through 2-meter length belt filter presses

Typical Applications

  • Municipal sludge from 15% to over 50% solids
  • Non-flowable products
  • Calcium Carbonate
  • Magnesium Hydroxide paste
  • Cellulose fiber
  • Spent grain
  • Battery paste

Benefits (Twin Screw Feeder)

  • Capable of varying auger sizes without changing pump arrangement to match the width of the TSF opening to the drop zone
  • Concentric rotation in a close tolerance pressure tube allows the TSF to generate positive stuffing pressure to the pump inlet (normally between 10 to 30 PSI at the pump inlet)
  • Dual augers counter-rotate to create a pull-down effect with the product
  • Intermeshing augers provide self-cleaning action so product will not stick to the augers and fill in the flights
  • Sidewalls are completely vertical into the augers, which does not allow product to bridge
  • Close tolerance to sidewalls eliminates product ledge where bridging can gain a foothold
  • TSF can be run at separate RPM from the pump, allowing control over the amount of stuffing pressure

Benefits (G4 Pump)

  • Universal joint is out of flow path for unobstructed flow to pump cavity inlet
  • Wide sweep pump inlet to lower friction loss
  • Patented auger feed on rotor head stuffs product directly into the cavity without obstruction
Fluidslurry
Operationwith electric motor
Technology2 screws
Mobilitystationary
Domainindustrial, for the chemical industry, for wastewater treatment
Applicationstransfer, discharge, control, feed, conveying
Fluid specificationfor solids-laden fluids, for high-viscosity fluids
Other characteristicssuction, high-efficiency, horizontal mount, vertical
FlowMin.: 0 us gal/min (0 l/min) Max.: 4,500 us gal/min (17,034.35303 l/min)
PressureMin.: 0 psi Max.: 1,500 psi
2 screws pump 2000 HS
moyno 2000 series pump

People Also Ask

The 2000 HS large screw pump is a type of positive displacement pump that is designed for handling viscous materials and heavy-duty applications. It features two intermeshing screws that rotate in opposite directions to move the fluid through the pump.

The 2000 HS large screw pump is commonly used in the oil and gas industry for pumping crude oil, heavy fuel oil, and other viscous fluids. It is also used in chemical processing, food and beverage production, and wastewater treatment.

Some advantages of using a 2000 HS large screw pump include their ability to handle high viscosity fluids, their low pulsation flow, and their ability to operate at high pressures. They are also relatively easy to maintain and can handle abrasive or corrosive materials.

To select the right 2000 HS large screw pump for your application, consider factors such as the viscosity of the fluid, the flow rate required, the pressure needed, and the temperature range. You should also consider any specific requirements for the installation environment and any regulatory compliance requirements.