What is a Seepex pump used for?

SEEPEX open hopper pumps are used to discharge thickened and dewatered sludges for onward processing . SEEPEX can also directly mount pumps under storage silos that have a capacity to backmix to control sludge dry solids content.

Where are Seepex pumps made?

Headquartered in Bottrop, Germany , SEEPEX has more than 800 employees worldwide and specializes in manufacturing advanced pump technology that efficiently conveys highly viscous or abrasive substances at low pulsation rates.

How do cavity pumps work?

Progressing cavity pumps work on the positive displacement principle, in which an eccentrically rotating rotor forms a progressive cavity within an elastic stator . In the inlet phase, the pumped medium is sucked into this cavity.

SEEPEX progressive cavity pumps Archives - Page 2 of 4

BN10-6L seepex BN

Parameters Brand:：SEEPEX Performance：Wear-resistant Flow rate：0.5-5(m3/h) Drive mode：Electric Weight：50kg Number of impellers：Single stage Power：1.5kW Lift：0m Pump shaft position：Horizontal Speed：54-380(rpm) Suction port：DN65(mm) Discharge port：DN50(mm) Output flow rate：200 Voltage：380V Efficiency：98% Material：Stainless steel Shaft power：1.5 Model：BN10-6L Advantages of BN10-6l seepex BN10-6 pump adopts advanced engineering design to ensure efficient fluid delivery, whether it is high viscosity liquid, corrosive media … Read more

BN17-6 seepex BN

Parameters Drive mode：Electric Suction diameter：DN80 Performance：Wear-resistant Discharge diameter：DN80 Number of impellers：Single stage Power：4kW Flow rate：4.5-22.4 Material：Cast iron Head：60 Model：BN17-6 Speed：276 Shaft power：4 Weight：60 BN17-6 introduction The rotor is the rotating part of the pump, and its surface is spiral, which can push the liquid to flow along the axial direction of the pump body. The … Read more

BN200-12T seepex BN

Parameters Advantages of BN200-12T The seepex BN200-12T is a large screw pump that can convey complex media with high viscosity, fibers or particles. This large-flow screw pump can meet various process requirements with its excellent self-priming ability and high head performance. Even if the medium contains gas or solid particles, the BN200-12T can continuously and … Read more

BN15-6L seepex BN

Parameters Brand：seepex Speed：279(rpm) Power：3kW Drive mode：Electric Suction port：DN80(mm) Suction head：10m Performance：Wear-resistant Discharge port：DN80(mm) Shaft power：3 Number of impellers：Single stage Efficiency：98% Operating temperature：Normal temperature Flow rate：3.1-16.4(m3/h) Output flow rate：200 Material：Stainless steel Head：60m Weight：80kg Model：BN15-6L BN15-6l introduction seepex BN15-6l adopts self-priming design, can handle negative pressure suction, and can provide high lift. Thanks to its unique structure, … Read more

BN5-6L seepex BN

Parameters Advantages of BN5-6l First, it has excellent self-priming ability and can suck liquid from a lower liquid level, which greatly improves the reliability of the system. Secondly, due to the unique spiral impeller design, seepex BN5-6l can easily handle sewage containing impurities such as fibers and paper scraps, avoiding the problem of pipe blockage. … Read more

Seepex Range Pump-PMV Pump

The Benefis of Seepex Range Pump

Seepex Hygienic Pump-PMV Pump

Seepex Pump-PMV

Seepex Pumps-PMV

SEEPEX Pumps Universal Parts

Material Optional: SS304/SS316L/DSS/Tool Steel Plating Optional: Cr Plating/Tungsten Carbide Include Sealing Covers, Retaining Sleeves, Coupling Rod Pins, Snap Rings, O-rings, etc. Mechanical: Long life, good anti-viberation Packing seal: low cost, easy to install&replace Universal Parts Available for SEEPEX Pump Models PMV Pump can supply the whole set of replaceable parts for SEEPEX progressing cavity pumps. … Read more